User's Manual

Note: placing loggers will remove them from the components menu. This is because

loggers can only be placed once.

Once two or more loggers have been placed, a pipe can be drawn. Select the Pipe

icon and draw a line from one logger to the other. On releasing the mouse button, a

configuration box will appear.

Select the material the pipe is made from, the length of the pipe, and the diameter

of the pipe. Click OK.

Now the pipe has been drawn and configured.

Note: It is not necessary for the pipe layout to be a 1:1 scale. The pipes’ lengths are

set in the Pipe Properties box upon drawing a pipe, and can be changed by right-

clicking on the pipe, and selecting “Pipe Properties”.

Exporting Pipe Layouts

Once a layout has been drawn, it can be exported into a single file. Click Tools ->

Export Pipe Layout.