User's Manual

21
P+ Setup
The P+ Setup function sets the patrol times and the logging times of the loggers.
These times will determine when the loggers will be detectable by the Patroller unit,
and when they log data. Refer to FAQ 203 on configuring the logger to ‘Sleep
Mode’.
Program Loggers
Default settings only permit the loggers to be transmitting to a Patroller unit up to a
maximum of 8 hours per day. This can be changed using the distributor’s password
in the Options menu of the Main Screen. The times loggers are available to
Patroller units are denoted by the green ticks on the timetable, and can be changed
by simply clicking on the green or red tiles.
Logging times are set to once per day, at quarter-hour intervals. The Logging Days
parameter determines what days during the week the loggers take readings.
To program the loggers, select the desired logger by ticking the box, and clicking the
button. Be sure to enable or disable which parameters to
program by using the checklist at the top of the window.
Read Loggers
Under the Read Loggers tab, the loggers of choice can be read, which will give their
current settings laid out.