User's Manual

11
Under ‘Defined DMAs’, DMAs can be chosen to see which database loggers belong
to. Loggers that do not belong to any DMA will be under <None>.
Under the ‘Filters’ section, loggers can be filtered out using the specific filter options.
To enable a chosen filter, tick the checkbox next to the filter name. Current filters
that can be enabled are: Logger type, DMA Name, Reference number range, Leak
state, and active Patrol date range.
Under the ‘Database’ section, chosen filters can be applied to the list of loggers and
their data by ticking the checkbox next to “Filter Data”. More columns can be added
to the list of t loggers to give more information for each logger by clicking on File ->
Options, and selecting the information desired.
The tabulated data can be exported to a .csv file by either clicking the
button, or by clicking File -> Create CSV File -> Export Currently-
Displayed Loggers.
Lift + Shift
The Lift+Shift function is used for loggers who do not stay in the same place, and
take one measurement only at various locations. If at any point the list of loggers
does not appear, try the following:
- Ensure the correct database is selected. To do this click the Database
parameter, and select the correct database.
- Go to File -> Options, and ensure the Ref Number checkboxes are ticked for
both Lift Screen and Shift Screen.