Owner's Manual

SETTINGS OF THE SPECTRUM ANALYZER
PowerAcoustik Spectrum Analyzer has various settings to create the best light show in your car.
Mode
Press the Mode button to choose the orientation of the Spectrum Analyzer. Choose from bottom, top,
middle, left side, right side, with or with/out peak level indicators. After all options have been displayed, all
LEDs will flash to indicate starting over with the defualt option.
Color
Press the Color button to choose the Spectrum Analyzer color. Options include 7 solid colors, randomly
changing, slowly fading, and multi-color chasing. After all options have been displayed, all LEDs will
flash to indicate starting over with the defualt option.
Sensitivity
Press the Sensitivity (S) button to increase or decrease the microphone sensitivity/gain level. Three
levels are available, low, medium, & high. Low is indicated by a small cluster of orange LEDs in the lower
left side. Medium level is indicated by the addition of a cluster of pink LEDs in the center. High level is
indicated by a large cluster of violet LED’s in the lower right. After stopping on the desired sensitivity level,
the Spectrum Analyzer will return to the analyzer mode.
Color Brightness
Press the Color Brightenss button (L) to increse or decrease the brightness of the Spectrum Analyzer.
Three levels are available, low, medium, & high. Low is indicated by a small cluster of orange LEDs in
the lower left side. Medium level is indicated by the addition of a cluster of pink LEDs in the center. High
level is indicated by a large cluster of violet LED’s in the lower right. After stopping on the desired
sensitivity level, the Spectrum Analyzer will return to the analyzer mode.
High SensitivityMedium SensitivityLow Sensitivity
High BrightnessMedium BrightnessLow Brightness
PowerAcoustik Inc., ● 1550 South Maple Ave. Montebello, California, 90640 ● wwww.poweracoustik.com