User Manual

Page 16 of 20 pages
F  
Rapid or fierce heat
Rapid or fierce heat is obtained by burning many small pieces of wood.
Maximum amounts of fuel:
The maximum allowed amount of fuel per hour is:
Wood: . kg
If these limits are exceeded, the stove will no longer be covered by the factory guarantee, and
it may also become damaged due to excessive heat, the glass may turn white, for example. If
the flue gas temperature exceeds 
o
C, the HWAM
®
SmartControl
TM
will revert to safety
adjustments and automatically turn down the air valves to avoid overheating. When the
temperature is reduced to 
o
C, the normal functions apply again. The stove has been
approved for intermittent use.
Typical re-firing interval
Typical re-firing interval at nominal performance
Wood:  min (. kg)
Prolonged burning time
You achieve the slowest combustion by setting the desired room temperature at level . At this
level the combustion takes place with the lowest possible flue gas temperature and the ember
phase will be drawn out as long as possible.
How to achieve the best combustion
The HWAM
®
SmartControl
TM
is purposely designed to generate the cleanest and the most eco-
nomical combustion. A good combustion is achieved when the fire gets the right amount of
oxygen supply at the right time and place in the combustion chamber. The HWAM
®
SmartCon-
trol
TM
allows for variations in external circumstances. Nevertheless, it is important to use clean
and dry wood (humidity approx. -%). Read more on www.hwam.com.