User Manual HWAM® SmartControl™ Generation 2

22
4
5
4
Restoking
When HWAM® SmartControl™ detects that it is
time to restoke, a notification is displayed on
all devices with IHS SmartControl™ open. In
addition, the wireless room temperature sensor
emits an audible signal for restoking. Add -
pieces of new wood to the combustion cham-
ber. HWAM® SmartControl™ will automatically
switch back to the combustion phase when the
door is opened and additional wood is added.
The above cycle is then repeated.
5
Standby
When there is no more wood burning in the
stove and the temperature has dropped,
HWAM® SmartControl™ goes into standby mode
and the valves are closed to prevent warm air
from the room escaping into the chimney (loss
of energy).
When the wood-burning stove is not in use, it
is recommended that the app should be shut
down.