Manualshelf

Operating Guide

ManualsBrandsHustler ManualsZero-Turn Riding Lawn MowersRaptor SD 24-HP V-twin Dual Hydrostatic 60-in Zero-turn Lawn Mower with Mulching Capability (Kit Sold Separately)
21222324252627282930
REV P 3-8 604856
Anti-Scalp Wheels
Anti-scalp wheels are standard on these mowers. These
wheels are designed to minimize scalping when mowing on
rough uneven terrain. Figure 3-12
Anti-scalp wheels can be installed in two positions. With
the wheel installed in the bottom hole, the wheel is located
1.60” (40.6mm) below the mower blades. This setting is pre-
ferred when mowing at cutting heights of 2-1/2” (63.5mm) or
higher.
When the wheel is mounted in the top hole, it is located .70”
(17.8mm) below the mower blades. This is the acceptable
setting for mowing at cutting heights of 1-1/2” (38.1mm) or
higher.
A. Anti-scalp wheel B. Adjusting holes
Figure 3-12
A
B