User Guide

333559 8/06 4-5
Kohler 15 & 17 HP Engine Installation
NOTES:
1. Supplied with engine.
2. Part of item 30 (793117 Kohler Wire Harness).
3. Torque to 48-45 ft.-lbs.
4. Engine oil capacity; 1.6 US qts.
5. Engine speed; 2450±50 RPM.
6. Coat ID with anti seize.
7. Torque to 33-37 ft.-lbs. Do not reuse factory installed screw when performing
service to mower requiring removal of engine, replace with 3/8-16 X 1.0 long
grade 5 cap screw.
INDEX
NO.
SERVICE
PART NO.
MFG. PART
NO.
QTY. DESCRIPTION
1 792945 792945 1 KOHLER 15 HP ENGINE SV470S
792952 792952 1 KOHLER 17 HP ENGINE SV530S
2 793133 793133 1 KOHLER 15 & 17 HP EXHAUST MANIFOLD
3 739144 792796 1 CS M 6-1.0 X 12 10.9 HX
4 024927 024927 4 NT .250-20 HX GR 5 ZNYC
5 768515 768515 6 FW .281 X .625 X .051/.080 HD ZNYC
6 706531 706531 1 GM 1.12 X 1.75 X 1.37 X .12
7 794644 794644 1 GM 1.50 X 2.12 X 1.75 X .12
8 771428 771428 1 RED BATTERY CABLE BOOT
9 044255 044255 1 NT #10-32 HX ZN
10 030817 030817 1 STARTER SOLENOID
11 792762 792762 1 BATTERY CABLE
12 056077 056077 2 CS .250-20 X 1.00 HX G5 ZNYC
13 330274 330274 1 CLUTCH ANCHOR
14 793885 793885 1 LW .375 INT-EXT TOOTH
15 036244 792788 4 CS .375-16X1.000 HX G5
16 784918 784918 1 RUBBER BUMPER
17 793760 793760 1 ENGINE-HYDRO DRIVE PULLEY
18 712372 712372 1 KEY 1/4 SQ. X 0.66 LONG
19 784835 784835 1 FASTRAK CLUTCH
20 791251 N/A 1 CLUTCH WIRE HARNESS PIGTAIL
21 763417 763417 1 FW .454 X 1.50 X.250
22 785048 785048 1 CS .437-20 X 3.00 HX G5 ZNYC
23 316836 N/A 1 ENGINE GUARD
24 767954 767954 6 FW .406 X .812 X .060 SAE HD ZN
25 052860 052860 6 CS .375-16 X 1.25 HX G5 ZNYC
26 768523 768523 2 FW .343 X .687 X .051/.080 HD ZNYC
27 016253 016253 2 CB .312-18 X .750 FUL ZN
28 793125 793125 1 MUFFLER 15,17 KOHLER & 16 HONDA
29 796516 796516 1 3/8-18 OIL DRAIN VALVE
30 034272 034272 2 NT .312-18 HX G5 ZNYC
31 794180 794180 2 1.125" EXHAUST CLAMP
32 793158 793158 1 KOHLER 15 & 17 HP MID EXHAUST PIPE
33 793117 793117 KOHLER WIRE HARNESS
35 104786 104786 1 OIL DRAIN HOSE (NOT SHOWN)