Corp. Network Router User Manual

The Hussmann Interface Module may be operated

from either battery power or from a 120V/12VDC

transformer. When using the transformer, connect

Module before plugging in the transformer. The

startup screen will automatically appear.

HUSSMANN

INTERFACE MODULE

CORPORATION

VER 1.30

When battery operated, the Module will shut down

if the key pad has not been used for three minutes.

When a transformer is used, the hand held module

will beep and remain on.

If the battery is too weak to function, the menu

screen will become faint or not come up at all. If

the battery is completely without power, the hand

held module will beep and show an alarm

message. There is also a Low Battery message

that appears at the Main Menu for Protocol™.

Regardless of the power source, if Protocol™ is

not communicating with the hand held module, a

beep will sound and a

COMM ERROR message will

appear. If the Protocol™ system is without power,

the hand held module will beep and show an

ALARM message.

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.) 970307

P/N 374511B

Page 2

PROTOCOL

™

Hand Held Device