Corp. Network Router User Manual

CONFIG MENU (continued)
4- COMM SETUP
Press 4 on the Keypad to enter the Communication
Setup Submenu.
This screen provides for assigning each Protocol a
station number for computer identification on
Hussnet™. It also provides baud rate assignment.
The baud rate is the rate at which a computer can
receive data from Protocol. All Protocols must
have the same baud rate in order to communicate.
A baud rate of 19200 is suggested.
Press the CLR key. Key in the number. Press
ENT.
Press ESC to return to CONFIG MENU.
Note: All baud rates will be the same for all
Protocols in a given store. However, the station
numbers must be different.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.) 970307
P/N 374511B
Page 20
PROTOCOL
™
Hand Held Device
COMM SETUP MENU
STATION NUMBER – 00
BAUD RATE – 19200
CONFIG MENU
1-SET THE CLOCK
2-SENSOR SETUP
3 - P ROTOCOL SETUP
4-COMM SETUP
5-LIGHT CONTRO L
6-TEMP CONTRO L