Corp. Network Router User Manual

CONFIG MENU
2-CONFIG MENU
This set of menus is used to make changes in the
Protocol’s configuration. Press 2 on the Keypad
to enter the CONFIG submenu.
1- SET THE CLOCK
Press 1 on the Keypad to enter the CLOCK SETUP
submenu. This screen has 5 fields used to set the
correct time/date.
Hour 2 2
(24-hr clock only)
Minute 2 3
Month date 0 1
Day date 0 2
Year date 9 6
(Last two digits only)
The screen appears with the cursor indicating the
hour field.
22
CURSOR
Press the CLR button. This will change the field
to 00. Then input the correct hour and press ENT.
The cursor will move to the next field. Repeat the
process through each field.
Press ESC to return to the CONFIG MENU.
When enabled, the DAYLIGHT function will auto-
matically adjust the time and year (in case of leap
years) corresponding to changes in TIME and DATE.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.) 970307
P/N 374511B
Page 10
PROTOCOL
™
Hand Held Device
P ROTOCOL MAIN MENU
1 - S TATUS MENU
2-CONFIG MENU
3 - D E F ROST MENU
4-MAINT MENU
5-ALARM MENU
CONFIG MENU
1-SET THE CLOCK
2-SENSOR SETUP
3 - P ROTOCOL SETUP
4-COMM SETUP
5-LIGHT CONTRO L
6-TEMP CONTR O L
CLOCK SETUP MENU
T I M E – 22: 2 3
DAT E – 0 1/ 02
Y E A R – 9 6
DAY L I G H T – E N A B L E D
S P R I N G – 02:00 04/28
FA L L – 02:00 10/27