Corp. Network Router User Manual

STATUS MENU (Continued)
3-TEMPERATURE MENU
T1 temperature reading for suction pressure reset
or optional temperature input.
T2 temperature reading for satellite or optional
temperature input.
T3 If split suction is installed, T3 may be factory
set to read head pressure instead of temperature.
Screen will show T3- ___PSI.
If split suction is not installed, T3 is a designated
temperature input; but if you prefer, it can be con-
figured as a pressure input (See page12).
Press ESC Key.
A7 thru A 1 2 are additional temperature inputs.
These readings may be established by the user as
either ANALOG or DIGITAL under the CONFIGU-
RATION MENU. When set on DIGITAL the read
out will be either OPEN or CLOSED. The digital
setting is applicable to thermostats or auxiliary
contactors.
When the ANALOG setting is used a thermistor is
used to retrieve temperature readings between – 40
and + 120˚F.
When not used the menu will read
OPEN if set on
DIGITAL. Set on ANALOG, an unused input will
produce a – 40.
Press ESC Key.
4-COMPRESSOR RUN METER
COMPRESSOR RUN METER submenu appears.
This menu shows the total number of hours that
each compressor has been operating.
Press ESC to return to S
TATUS MENU.
970307 HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
P/N 374511B
Page 9
PROTOCOL
™
Hand Held Device
AU X I L I A RY MENU
A7 - O P E N
A8 - C L O S E D
A9 - O P E N
A10 - - 40
A11 - 6 0
A12 - - 40
COMPRESSOR RUN METER
C O M P 1 5 6 H O U R S
C O M P 2 5 7 H O U R S
C O M P 3 5 6 H O U R S
C O M P 4 5 5 H O U R S
C O M P 5 0 H O U R S
C O M P 6 0 H O U R S
T E M P E R ATURE MENU
F S P
T1 - - 40 0
T2 - - 40 0
T3 - - 40 0
PRESS ENT FOR MORE
T E M P E R ATURE MENU
F S P
T4 - 0 0
T5 - 0 0
T6 - 0 0
T7 - 0 0
T 8 0 0
PRESS ENT FOR MORE