Corp. Food Warmer User Manual

IGHT-RHR, RHR2-HEX-0608

Bumper Installation Instructions

Step 1: Make sure the aluminum channel and end caps

are installed.

Step 2: Use silicone lubricant to help the

bumper slide into the channel.

Step 3: Starting on one end: while inserting the bumper,

push it up against the end cap to prevent

the bumper from shrinking after installation

(when it gets cold).

Step 4: As you insert the bumper into the channel with

one hand, pull the bumper toward you with

the other to open the inside lips. Slowly

apply pressure by rolling the bumper into

the track.

Installation (Cont'd)