Operation Manual

3012-1066
English - 31
INSTALLATION
3.7 Checking the Installation
Check the loop signal by inspecting the indicator lamp on
the charging station.
 Solid green light = good signals.
 Flashing green light = loop system is shut down and
the robotic lawnmower is in ECO mode, see 6.9
Settings on page 61.
 Flashing blue light = interruption in the boundary loop,
no signal.
 Flashing red light = interruption in the charging

by an authorized dealer.
 Solid blue light = weak signal. This may depend on
the boundary loop being too long or that the wire is
damaged. If the robotic lawnmower still works, this is
not a problem.
 Solid red light = fault in the circuit board in the

authorized dealer.

is shown, see chapter 9.3 Indicator Lamp in Charging
Station page 84.
1157866-26,420,430X,450X,EN_160314.indd 31 2016-03-14 16:58:49