Operation Manual

English - 60
MENU FUNCTIONS
Change the name of a prole
The names of the proles can be changed, to make
it easier to remember what settings are stored in the
respective prole.
• Select the prole name to be changed.
• Press OK.
• Select Rename and press OK.
• Move the cursor withe the arrow keys. Press OK to
select a letter. Press BACK to save the new name.
• The names of the proles will be shown in the menu
Settings - Proles. The name of the selected prole is
also visible on the start screen.
Use a Prole
To activate and use a prole, and thus use the saved
settings, the following action must be taken.
• Select the prole to activate.
• Press OK.
• Select Use and press OK.
The robotic lawnmower will now use the settings stored in
the prole.
One Automower
®
for several gardens
The unique connection between the mower and the
charging station is saved in the proles. This enables up
to three charging stations to be connected to the same
robotic lawnmower.
To connect a new charging station to the robotic
lawnmower:
• First save a prole to be used with the original
charging station.
• Then set the mower in the new charging station that
will be connected to the mower.
• Check New loop signal, See 6.4 Security on
page 46.
• Save a prole for the new charging station.
To use the robotic lawnmower in the original charging
station, the rst prole must now be selected. To use the
robotic lawnmower in the new charging station, that prole
must be selected.
3012-1422
3012-1427
OM_1157863-26_HQ 310,315,EN_160229.indd 60 2016-02-29 10:52:30