Operating Guide

English

–

TING AND ST

OPPING

Chec

k before starting

•

Inspect the working area. Remove any objects that could

be thrown out.

• Check the cutting attachment. Never use blades that are

dull, cracked or damaged.

• Check that the machine is in perfect working order. Check

that all nuts and screws are tight.

• Make sure the gear housing is lubricated correctly. See

instructions under the heading Gear housing.

• Check that the cutting attachment always stops when the

engine is idling.

• Only use the machine for the purpose it was intended for.

• Make sure that the handle and safety features are in good

working order. Never use a machine that lacks a part or

has been modiﬁed outside its speciﬁcations.