Owner's Manual

7
English
Technical data
TECHNICAL DATA
226HD60S 226HD75S
Engine
Engine Type Air-cooled 2-stroke gasoline Air-cooled 2-stroke gasoline
Cylinder displacement, cu.in/cm
3
1.44/23.6 1.44/23.6
Cylinder bore, inch/mm 1.34/34 1.34/34
Stroke, inch/mm 1.02/26 1.02/26
Idle speed, rpm 3000±200 3000±200
Max. output, Hp (kw)/ rpm 1.15 (0.85)/8000 1.15 (0.85)/8000
Emissions Durability Period according to
California Air Resources Board, h.
125 125
Ignition system
Spark plug NGK CMR7H NGK CMR7H
Electrode gap, inch/mm 0.025/0.6-0.7 0.025/0.6-0.7
Fuel and ludrication system
Fuel Mixture (Gasoline 50 : Oil 1) Mixture (Gasoline 50 : Oil 1)
Fuel tank capacity, fl. oz/liter 15.9/0.47 15.9/0.47
Manufacturer/type of carburetor Walbro Diaphragm type Walbro Diaphragm type
Trimmer
Type Double-sided blades Double-sided blades
Length, inch/mm 23.6/600 29.5/750
Pitch, inch/mm 1.38/35 1.38/35
Transmission Centrifugal clutch. Cam-crank Centrifugal clutch. Cam-crank
Reduction ratio 5.11 5.11
Weight
Weight without fuel and grease, Lbs./kg
12.9/5.8 13.3/6.0
Noise emission
Sound power level, guaranteed L
WA dB(A) 102 102
Noise level
Sound pressure level at the operator's
ear, measured according to EN ISO 22868,
dB(A):
91 91
Vibration level
Vibration levels at handles, measured
according to EN ISO 22867
Idling front/rear handle, m/s2 3.0/4.6 3.0/4.7
Top speed front/rear handle, m/s2 4.5/5.6 4.9/5.7
NOTE: This spark ignition system complies with the Canadian standard ICES-002.
NOTE: Specifications are subject to change without notice.