Use and Care Manual
Connecting the inator
MOC.SLOOTYKSUH 5
aelP se contact 1-888-43-HUSKY for further assistance.
Operation – Inate Tires
1
Operating the inator2
CAUTION: Do not over‐inate the item being inated.
Follow the manufacturer’s suggested PSI levels on the
item you are inating.
Remove the 12-Volt inator from the color box.
Connect the 12-Volt power cord (D) into a DC 12-Volt power outlet.
Screw the connect valve adaptor (J) onto the tire air valve until it is
securely screwed to the tire air valve
A
B
Move the On/Off switch (B) to the I position to turn the inator on.
Monitor the PSI on the pressure gauge (A) to ll your item to the
desired pressure.
Once you have reached your desired air pressure, move the On/Off
switch (B) to the O position.
Disconnecting the inator3
Remove the air hose (K) from the tire by screw off the
connect valve (J).
Remove the 12-Volt power cord (D) from the DC 12V-Volt
power outlet and allow the inator to cool.
Return the inator and attachments to the color box.
J
k
J
k