Instructions / Assembly

5
Installing the drawer liner
□
Place the drawer liners (L) in appropriately sized drawers
and the chest lid area to protect the surface.
7
L
HUSKYTOOLS.COM
Pleas e contac t 1-888-HD-HUSK Y fo r furthe r assistance .
Assembly (continued)
EE
6
CC
Installing the casters
□
□
□
Lay the side locker (O) on its back. Use the packaging
material to protect the finish.
Mount the two swivel casters with brake (G) to the
side locker (O) by using four bolts (CC) per caster. The
swivel casters with brake (G) should be installed on the
Tighten all bolts with a wrench (EE).
end of side locker (O).
CAUTION: Do not over tighten the screws.
G
O
7
Installing the handles on the side locker
□
Remove the handles (A) from the top chest (B) by loosening
□
Tighten all bolts securely with a screwdriver.
□
Attach the handles (A) to the side locker (O) by using two
bolts (BB) for each handle.
A
the bolts (BB).
B
O
8
Attaching the side locker to the cabinet
□
of the top chest (B) and rolling cabinet (E).
Clip the side locker (O) to the bolts on the left side
□
Pull the side locker (O) down to ensure it is well mounted.
B
E
O
□ Return the side locker (O) to its upright position.
□ Screw the bolts (CC) on the top chest (B) and rolling
NOTE: Two people may be required to complete this step.
BB
CC
cabinet (E). Do not fully tighten bolts at this time.