SKU# 1003 103 121 THD.com# 1003 041 640 THD.com# 1006 995 064 Model# HOTC8010BB1S Model# HOTC8010BL1S USE AND CARE GUIDE 80 IN. 10-DRAWER TOOL CHEST AND CABINET SET WITH SIDE LOCKER Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this chest/cabinet.
Table of Contents Table of Contents.....................................................................2 Assembly.........................................................................6-8 Safety Information...................................................................2-3 Operation...........................................................................9 Warranty.......................................................................................3 Maintenance.................................
Safety Information (continued) WARNING: The chest-cabinet is intended for household use. WARNING : Do not allow the product to fall from high places. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Pre-assembly TOOLS REQUIRED Phillips screwdriver Safety goggles HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB DD CC Part Description Quantity AA Bolt M6x15L 4 BB Bolt M8x15L 8 CC Bolt M8x15L 16 DD Screw M4x10L 24 EE 10 mm/13 mm wrench 1 SPECIFICATIONS Maximum capacity (top chest) 1500 lbs. Maximum capacity (bottom cabinet) Maximum capacity (side locker) 1800 lbs. 500 lbs. 771.8 lbs.
Pre-assembly (continued) PACKAGE CONTENTS O P S B F L R A C J Q N K M D F E H Part Description I Quantity Part Description G Quantity A Handle 4 J Lock B Top chest 1 K Key (set) 3 C Bracket 4 L Drawer Liner 11 D Side handle 1 M Grommet 2 E Rolling cabinet 1 N Power strip 2 F Power strip bracket 4 O Side locker 1 G Swivel caster with brake 6 P Side locker shelf clip 8 H Regular caster 2 Q Side locker shelf 2 I Drawer silde 120 lbs (pair) 13
Assembly 1 Attaching the side handle 2 Placing the chest NOTE: Two people may be required to complete this step. □ Attach the side handle (D) to the rolling cabinet (E) using four bolts (AA). □ Attach two handles (A) to the top chest (B) for each side by using two bolts (BB) per handle. □ Place the top chest (B) on top of the rolling cabinet (E). NOTE: The holes in the cabinet are tapped and do not require nuts.
Assembly (continued) 5 6 Installing the casters Installing the drawer liner □ Place the drawer liners (L) in appropriately sized drawers and the chest lid area to protect the surface. CAUTION: Do not over tighten the screws. □ Lay the side locker (O) on its back. Use the packaging material to protect the finish. □ Mount the two swivel casters with brake (G) to the side locker (O) by using four bolts (CC) per caster. The swivel casters with brake (G) should be installed on the end of side locker (O).
Assembly (continued) 9 10 Installing the brackets on side locker Tightening the side locker □ Open the door of the side locker (O). □ Tighten all the bolts inside the panel by using a screwdriver. NOTE: The holes in the cabinet are tapped and do not require nuts. □ Attach the brackets (C) to the back of the product to secure the side locker (O) to the top chest (B) and rolling cabinet (E). Place the brackets over the holes and secure with four screws (DD) per bracket.
Operation 1 Locking and unlocking the unit 2 Removing/installing the drawers Removing the drawers □ Fully extend and empty the drawer. □ On the slide, lift up the plastic release lever on one slide and push down the plastic release lever on the other slide. Gently pull the drawer out so the slides can ride over the stops. IMPORTANT : The drawers must be fully closed before locking / unlocking the unit.
Maintenance 1 2 Maintaining the casters □ Grease the casters annually using high quality bearing grease. Care and Cleaning □ This steel product has been coated with industrial powder coating for a durable finish. □ To help protect the powder coated finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface. □ Use a glass cleaner (Windex R or equivalent product) to clean and maintain all surfaces of powder coating.
Service Parts P S F L A R C J Q N K M D F H Part Description I Quantity Part Description G Quantity A Handle 4 K Key (set) 3 C Bracket 4 L Drawer Liner 11 D Side handle 1 M Grommet 2 F Power strip bracket 4 N Power strip 2 G Swivel caster with brake 6 P Side locker shelf clip 8 H Regular caster 2 Q Side locker shelf 2 I Drawer silde 120 lbs (pair) 13 R LED work light 1 J Lock 3 S Coat hook 1 11 HUSKYTOOLS.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
