Instructions / Assembly

Assembly
Attaching the side handle Installing the casters
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
Ensure all cabinet drawers are securely locked into
□ Lay the rolling cabinet (B) on its back on top of the
packaging material to protect the finish.
□ Mount the four swivel casters with brake (G) to the rolling
cabinet (B) usingfour bolts (CC) per caster. The swivel casters
with brake (G) should be installed on each end at the cabinet.
□ Mount the two swivel casters (I) to the center of the rolling
cabinet (B) using four bolts (CC) per caster.
□ Tighten all bolts with a 13 mm wrench (DD).
□
Return the rolling cabinet (B) to its upright position.
CAUTION: Do not over tighten the screws.
□
place using the key (K) and lock (O) on the rolling cabinet (B).
□
Attach the side handle (F) to the cabinet using four bolts
(BB).
Tighten all bolts with the 10 mm wrench (DD).
□
6

1

2
6
DD
B
G
CC
Do not over tighten the bolts to avoid damage to the finish.
WARNING:
Two or more people may be required for this
step due to the weight of the workbench.
F
BB
Installing the cord brackets
□
Attach the cord bracket (D) to the cabinet using two bolts
(AA) per bracket.

3
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
I
DD
CC
Installing the pegboard brackets
□
Attach the pegboard bracket (P) to the cabinet (B) and
pegboard (Q) using four bolts (BB) per bracket.

4
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
D
AA
□
Tighten all bolts securely.
□
Tighten all bolts securely.
BB
Q
B
P
NOTE: The holes for casters are tapped and do not
□
require nuts.