SKU # 1003 951 489 SKU # 1003 951 491 THD.com # 1003 907 504 THD.com # 1003 907 510 Model # HOLT5202B11 Model # HOLT5202BJ1 USE AND CARE GUIDE HUSKY 52 IN. ADJUSTABLE HEIGHT WORK TABLE WITH 2 DRAWERS Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU ! We appreciate the trust and confidence you have placed in Husky through the purchase of this work table.
Table of Contents Table of Contents ...................................................... 2 Assembly ............................................................... Safety Information........................................................ 2 Warranty ........................................................................ 3 Operation ................................................................ 8 Care and Cleaning ................................................... 4 Service Parts .............
Warranty The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service.
Pre-Assembly TOOLS REQUIRED Phillips screwdriver Safety goggles 10 mm Wrench 13 mm Wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part AA BB CC DD Description Screw M6 x 15L Bolt M8 x 15L Washer M8 5/8 in. Wrench CC BB Quantity 36 4 4 1 SPECIFICATIONS Maximum capacity (top drawer) Maximum capacity (bottom drawer) Maximum capacity 15 lbs 35 lbs 300 lbs NOTE: Begin product assembly close to the final intended location of your workbench.
Pre-Assembly (continued) PACKAGE CONTENTS G A M L B F C E D H J K Part Description I Quantity A Wood top 1 B Leg (Right) 1 C Crank handle 1 D Leveling feet 4 E Leg (Left) 1 F Top rail 1 G Rotating rod 1 H Support rail 1 I Caster 4 J Drawer Slide (pair) 2 K Drawer 2 L Drawer side panel 2 M Back panel 1 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Assembly 1. While unpacking the unit, you can leave the workbench wood top (A) inside the original packaging to prevent the top from being scratched during assembly. 2. Determine the front and back of the top before starting. The front of the wood top (A) has the Husky badge on the edge. 3. Attach the right leg (B) to the wood top (A) as shown using four M6x15L screws (AA). Be sure that the rotating mechanism faces the inside of work table. 5.
Assembly (continued) Or 7b. Option 2: Attach the support rail (H) to the bottom of the leg (B) and leg (E) using four M8x15L bolts (BB) and four M8 washers (CC). Finger tighten only. H BB Leveling feet installation D CC B B E E 10. Attach the drawer side panel (L) to the wood top (A) for two sides as shown by using three screws (AA) for each side. AA 8. Square the workbench and then securely tighten all fasteners with a 10 mm and 13 mm wrench. Note: Use caution to not overtighten. 9.
Assembly (continued) 15. Install the crank handle (C) into the shaft in the corner below the wood top as shown. 12. Using two or more people, stand the workbench in its upright position. 13. Install the drawers using the steps below □ Pull the slides and slide carrier out until fully extended. □ Hold the slide on the cabinet while aligning it with the slide on the drawer. □ Slightly insert one side and repeat for the other side. □ Slowly push the drawer until it is fully closed to engage the slide.
Operation 2 Height Adjustment 1 Leveling Foot Adjustment □ Insert the crank handle (C) into the shaft and align it in the hole until it is engaged. □ To raise the table, turn the crank handle counterclockwise to the desired height. □ To lower the table, turn the crank handle clockwise until it reaches the desired height. □ To avoid damage, do not keep turning the crank handle once it has rested at its highest or lowest position.
Service Parts G A B F C E D H J Part Description Quantity A Wood top 1 B Leg (Right) 1 C Crank handle 1 D Leveling feet 4 E Leg (Left) 1 F Top rail 1 G Rotating rod 1 H Support rail 1 I Caster 4 J Drawer Slide (pair) 2 10 I
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
