Use and Care Manual

5 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Care and Cleaning
Wash with oor soap and water either inside or outside of the garage. Some people prefer moving the product
outside and hosing it off.
Brush or sweep with cool water using a broom or sponge squeegee.
Mild soaps and other household detergents suitable for oors are usually effective. Never leave harsh detergents or
chemicals on product.
Normal household vinyl cleaners may be used to increase longevity and to remove stubborn debris.
Certain automotive vinyl products may cause the surface to become slippery. Use a non-slip vinyl protector such
as a clean-and-shine oor cleaner. After cleaning, apply a coat of oor polish for vinyl oors to add a long-lasting,
high-luster nish, even to older universal oor covers.
This is not a stain-proof product—certain dyes, inks, rubber tires, and chemicals may cause permanent staining.
Some non-permanent stains can be removed with spray-on Brake and Tool Cleaner, found in many auto parts stores
without damaging the product. However, use of Brake and Tool Cleaner may cause product discoloration. Never use
harsh chemicals such as tar remover or kerosene on this product.
This ooring is resistant to oil, battery acid, brake uid, anti-freeze, mud, and salt.
CAUTION: Leaving chemicals on the product for a long
period of time may cause damage. If a concrete oor has been
treated with certain sealers prior to mat installation, the sealer
may break down over time and adhere to the back of the mat
without causing damage to the mat.