Use and Care Manual

7 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
Care and Cleaning
INSPECTION
Maintain the product according to these instructions. You may not alter this product in any way.
1. Before using, inspect the jack thoroughly. Look for cracks in the welds, bent, damaged, loose, worn or
missing parts.
2. Inspect according to this manual ONLY.
3. If the jack has been subjected to abnormal load or shock (abuse), perform an immediate inspection. Take
the product to a local customer service representative for an authorized inspection before use.
Maintenance
ADDING HYDRAULIC JACK OIL TO THE JACK
IMPORTANT: When adding or replacing oil, ALWAYS use a good grade of (SAE 5W) hydraulic jack oil. NEVER use brake uid, alcohol,
glycerin, detergent motor oil or dirty oil of any kind. Improper oil usage will cause serious internal damage to the jack.
1
Removing the plug
□ With the saddle fully lowered and the jack on
level ground, unscrew and remove the oil ll
plug.
2
Filling the oil reservoir
□ Using a good grade of SAE 5W hydraulic jack
oil, ll the oil reservoir to the bottom of the
threads in the oil ller hole.
□ Replace and tighten the oil ll plug. Do not
allow dirt or debris to enter the system.