Use and Care Manual

4
Jack Operation
1
Inserting the handle
□ Insert the handle (B) into the handle socket of
the jack (A). Ensure the pin on the lower end of
the handle (B) snaps into the socket slot.
2
Placing the vehicle in park
□ Place the vehicle in PARK and apply the
emergency brake.
3
Closing the jack
□ Close the jack release valve by turning the
handle (B) clockwise.
4
Blocking the wheels
□ Block the vehicle wheels that are not being
raised.
5
Centering the jack
□ Center the jack under the load so that the
saddle (1) contacts the load rmly and will
not slip. (Refer to the vehicle manufacturer’s
owner’s manual to locate the approved lifting
points on the vehicle).
A
B
1