Instructions / Assembly

6
Maintenance
ADDING HYDRAULIC JACK OIL TO THE JACK
IMPORTANT: When adding or replacing oil, ALWAYS use a good grade of (SAE 5W) hydraulic jack oil. NEVER use brake uid, alcohol,
glycerin, detergent motor oil or dirty oil of any kind. Improper oil usage will cause serious internal damage to the jack.
1
Removing the plug
□ With the saddle fully lowered and the jack on
level ground, unscrew and remove the oil ll
plug.
2
Filling the oil reservoir
□ Using a good grade of SAE 5W hydraulic jack
oil, ll the oil reservoir to the bottom of the
threads in the oil ller hole.
□ Replace and tighten the oil ll plug. Do not
allow dirt or debris to enter the system.