Installation Guide

Dual Action Sander

5 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

Installation

Cleaning the air hose

□ A 3/8" air hose is required, with a maximum length of 25 ft.

□ Clean the air hose of accumulated dust and moisture

before connecting it to the air supply.

NOTE: If a longer air hose is required, connect a 1/2"

air hose to the 3/8" air hose to ensure the tool has the

necessary air supply.

Connecting to the air supply

□ Always use clean dry air. Excessive moisture and dirt will

greatly reduce the life of any air motor. We recommend the

to the tool as possible.

□

secured tightly.

Recommended Air Line Set-Up

Part Description

B Quick Plug

C Quick Coupler

D Air Hose

In-line Filter

F Air Compressor

PAGE 1
Installation 1 Cleaning the air hose □ A 3/8" air hose is required, with a maximum length of 25 ft. □ Clean the air hose of accumulated dust and moisture before connecting it to the air supply. NOTE: If a longer air hose is required, connect a 1/2" air hose to the 3/8" air hose to ensure the tool has the necessary air supply. 2 Connecting to the air supply Recommended Air Line Set-Up Part □ Always use clean dry air. Excessive moisture and dirt will greatly reduce the life of any air motor.