SKU # 1000000000 Model # H30MECH6BLK USE AND CARE GUIDE Husky 31in. 6-Drawer Cabinet Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m – 7 p.m., EST, Monday-Friday 9 a.m – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and co dence you have placed in Husky through the purchase of this cabinet. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents .................................................. 2 Assembly ...............................................................6 Safety Information ............................................... 2 Operation .............................................................. 9 Warranty ................................................................ 4 Cordless Power Tool Battery Chargers ............... 9 Specifications .....................................................
7. Extension cord □ Follow all manufacturers' Warnings and Operating Instructions for your extension cord. □ Do NOT insert extension cord through hole without grommet in place. □ Only use a three-wire extension cord with all three prongs intact. Never remove the round grounding prong. □ Extension cord must be connected to a 125 Volt GFCI protected outlet with proper ground. If GFCI outlet is not available, use an extension cord with GFCI protection built in.
Warranty The manufacturer warrants the product to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service.
Package Contents (continued) NOTE: Cabinet Keys are inside top drawer. B H I E A F G C Part D Description Quantity A Cabinet 1 B Cabinet handle 1 C Fixed caster 2 D Swivel caster 2 E Bracket 2 F Power tool holder 1 G Hook 2 H Power cord storage hook 4 I Screw driver holder 1 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Assembly 2 Attaching the casters CAUTION: Two people are recommended for assembly. 1 □ □ CAUTION: Do not over tighten the bolts. Attaching the cabinet handle □ Be sure the drawers and top lid are locked and lay the cabinet (A) on its back. Use packaging material to protect the finish. □ Attach the swivel casters (D) to the unit, on the same side as the handle (B), insert bolts (AA) through washers (BB) and swivel caster (D) into the cabinet (A).
4 Attaching the Power cord storage hooks □ □ Position 2 of the Power cord storage hooks (C) over the holes on the left side of cabinet (A). Attach Hooks (C) using bolts (BB) and tighten with supplied hex key (CC). Figure 4:1. Repeat this process for the other 2 Power cord storage hooks (C) for the rear of the cabinet (A).Figure 4:2. CAUTION: Do not over tighten the bolts.
5 Attaching the Screw driver holder □ Position the Screw driver holder (I) over the holes on the right side of cabinet (A). Attach 3 pcs Bolts (CC) and tighten with supplied Hex Key (DD). A I CAUTION: Do not over tighten the bolts. CC 6 Power outlet orientation □ The power outlet can be installed facing either the inside or the outside of the Cabinet.
Operation 1 Removing the drawers □ □ □ 2 Re-inserting the drawers □ □ Fully extend the empty drawer. Push up the one release lever while pulling down on the other release lever. Pull the drawer outward until it is released from the drawer slide. □ Extend the drawer slides. Insert the brackets on each side of the drawer into the slots in the slides, being careful that they are properly positioned. Once properly inserted, completely close the drawer to set the slides in their proper positions.
Maintenance 1 Caster maintenance 2 Drawer maintenance □ Grease the casters annually using high-quality bearing grease. □ Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and water. □ □ 10 Lubricate the slides semi-annually with high-quality bearing grease.
Replacement Parts For assistance with replacement parts please call 1-888-HD-HUSKY.
Questions, problems, missing parts? Before returning to the store call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.
