Instructions / Assembly

AA
CC
DD EE
BB
HUSK
YTOOLS.COM
YKSUH-DH-888-1 tcatnoc esaelP3 for further assistance.
Tools Required
Package Contents
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
Adjustable Wrench
Slotted or Phillips Screwdriver
32
CC
16
DD
M8x16 bolt
M6 nut
2
BB
M6x16 bolt
30
AA
M6x12 bolt
16
EE
M8 nut
Assembly
1 2
Attaching upright supports to bottom
tray and drawer body and side handle
Attach upright supports (C) to bottom tray (B), using 4 sets
of bolts (AA) and nuts (CC) for each upright supports.
Attach drawer body (A) on other end of upright supports (C)
using 4 sets of bolts (AA) and nuts (CC), but install side
handle (D) at the same time on preferred side by inserting
bolts (BB) through side handle (D), upright supports (C) and
drawer body (A) and tighten with nuts (CC).
Square up unit and tighten securely. See assembly diagram.
□
□
□
□
□
Return the cart to its upright position.
Attaching the casters
Be sure the drawers are locked and lay the cart on its top.
Attach the swivel brake plastic casters (F) to the unit, on
the same side as the handle, inserting bolts (DD) through
bottom tray (B).
Tighten securely with nuts (EE).
Repeat this process for the swivel casters without brake (E)
on the opposite side of the cart.
□
□
□