User Guide

www.husky.ca
www.hotrunners.com
Americas & Asia
288 North Road
Milton, Vermont, USA 05468
Toll Free [phone]
Tel. [phone]
Fax [phone]
Europe
Hot Runner Mold Building
B.P. 231, L-3403 Dudelange,
Luxembourg
Tel. [phone]
Fax [phone]
Recycled paper, containing a minimum of 20% post consumer fiber.
®/©2003 Husky Injection Molding Systems Ltd. Printed in Canada. April 2003
WORKING WITH HUSKY
Ordering a mold base from Husky means one-stop shopping,
full project management and single-source responsibility.
We provide:
• Extensive mold base engineering expertise, including
experience with closures, unscrewing systems, thinwall
parts and cutlery
• Stack mold experience with 2- and 4-level stack mold
bases, stack platens and offset stack systems to maximize
machine output
• Rotating Ratchet Ring technology for unscrewing closures,
providing faster cycles and reduced maintenance
• Manufacturing capacity to handle multi-mold orders and
large plate production
Automated manufacturing cells provide capacity for large and multi-mold
projects.
Accurate bore alignment ensures extended mold insert life.
Incorporating Husky mold bases into the mold is easy:
• You provide Husky with part drawing, including cavitation,
machine tie bar and shutheight specifications
• Husky recommends mold base size and ejection system
• Husky furnishes a core/cavity stack installation drawing
specific to the mold base
• Husky designs and manufactures a complete mold base
with all necessary accessories
The moldmaker simply designs and manufactures the core/
cavity stacks, supplying only the fasteners and seals to install
these components into the mold base.
Our Mold Technology Team delivers in depth product knowl-
edge, manufacturing resources and project management.
Husky actively protects its technical and design innovations through a global intellectual property
strategy. Husky currently has more than 900 patents and patent applications worldwide.
The equipment shown in this publication may be covered by one or more of these patents.
“Husky” is a trademark owned by Husky Injection Molding Systems Ltd.
Other company, product, and service names may be trademarks of their respective owners.