Use and Care Manual

In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS SIGNAL MEANING
!
!
WARNING:
CAUTION:
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
property damage.
●
GENERA L SA FETY RULES
WORK AREA
Keep the w ork area clean and w ell lighted.
Keep byst anders, children, and ot hers aw ay
w hile operating t he tool.
Cluttered benches and dark areas increase the
risks of accidents.
Distractions could
result in improper use and cause injury.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flam m able liquids, gases, or dust.
Avoid unintentional misfires.
The tool
creates a spark which may ignite flammable
liquids, gases or dust.
Always use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
●
●
●
●
●
●
●
●
●
●
CALIFORNIA PROPOSITION 65
WA RN ING:
!
When using tools,basic precautions
should alw ays be follow ed, including the
follow ing:
WA RN ING:
!
This product or it s pow er cord m ay
cont ain chem icals know n to t he State
of California t o cause cancer and birth
defect s or ot her reproduct ive harm.
Wash hands aft er handling.
PERSONAL SAFETY
Do not nail on top of another nail.
Use safet y equipment.
Dress properly. Do not w ear loose clothing
or jew elry.
Stay alert , w atch w hat you are doing and
use com m on sense w hen operating a pow er
tool.
Avoid unintentional firing.
Keep proper footing and balance at all tim es.
This is able
to cause the nail to be deflected and hit
someone, or cause the tool to react and result in
a risk of injury to persons.
A dust mask, non- skid
safety shoes and a hard hat must be used for the
applicable conditions. Wear a full face shield if
you are producing metal filings or wood chips.
Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Keep fingers away
from trigger when not driving fasteners,
especially when connecting the tool to the air
supply.
Remove finger from the trigger w hen not
driving fasteners.
Alw ays w ear eye protection.
Alw ays w ear hearing protection w hen using
the t ool.
Never carry the tool with
finger on trigger, the tool is able to fire a fastener.
Operator and
others in the work area should always wear
ANSI- approved safety goggles with side shields.
Eye protection is used to guard against flying
fasteners and debris, which may cause severe
eye injury.
Prolonged exposure to high intensity
noise may cause hearing loss.
●
●
03
02
●
SAVE THIS M A NUAL
Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance.Keep this manual and the
receipt in a safe and dry place for future
reference.
To avoid serious personal injury, do not
attempt to use this product unt il you read
thoroughly and underst and it
complet ely. Save t his m anual and review
frequent ly for cont inuing safe operation and
inst ruct ing ot hers w ho may use t his tool.
the
manual
WA RN ING:
!
The w arnings and precautions discussed in the manual cannot cover all possible condit ions and
situat ions that may occur. It must be underst ood by the user t hat com mon sense and caut ion are
factors w hich cannot be built int o t his product , but must be supplied by the user.
WARN ING:
●
WDH100401AV-S 10/10
Readoperatorsmanual ' : To reduce the risk of injury, user must read and understand operator's manual
before using this product.
Eyeprotection : , ,
.
Alwayswearsafetygogglessafetyglasseswithsideshieldsorafullfaceshieldwhen
operatingthisproduct
Risktohearing : Always wear ear protection when using this tool. Failure to do so may result in hearing loss.
Riskofseriouspersonalinjury : Never place hands or any other body parts in the fastener discharge area
of the nailer. The tool might eject a fastener and could result in death or serious personal injury.
SYMBOL S
Some of the following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
●
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
MAINTENANCE
RECOMM ENDED HOOKUP
TROUBLESHOOTING
WARRANTIES
LOADING FASTENERS
UNLOADING FASTENERS
CLEARING JAMS
NON- MARRING PAD
SETTING THE AIR PRESSURE
DEPTH ADJUSTMENT
FIRING THE TOOL
P3
P6
P7
P7
P8
P9
P9
P10
P10
P10
P12
P13
P14
P15
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS.