Use and Care Manual

WARNING: This product or its power cord may contain
chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
Do not nail on top of another nail. This can cause the nail
to be deflected and hit someone, or cause the tool to
react and result in a risk of injury to persons.
Remove finger from the trigger when not driving
fasteners. Never carry the tool with finger on trigger, the
tool is able to fire a fastener.
Always wear eye protection Operator and others in
the work area should always wear ANSI-approved
safety goggles with side shields Eye protection is
used to guard against flying fasteners and debris,
which may cause severe eye injury
Always wear hearing protection when using the tool
Prolonged exposure to high intensity noise may cause
hearing loss
Use safety equipment A dust mask, non-skid safety
shoes and a hard hat must be used for the applicable
conditions Wear a full face shield if you are producing
metal filings or wood chips
Dress properly Do not wear loose clothing or jewelry
Contain long hair Keep your hair, clothing, and gloves
away from moving parts Loose clothes, jewelry, or
long hair can be caught in moving parts
Stay alert, watch what you are doing and use common
sense when operating a power tool Do not use tool
while tired or under the influence of drugs, alcohol, or
medication A moment of inattention while operating
the tool may cause serious injury
Avoid unintentional firing Keep fingers away from
trigger when not driving fasteners, especially when
connecting the tool to the air supply
Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool
in unexpected situations
Do not use on a ladder or unstable supports Stable
footing on a solid surface enables better control of the
tool in unexpected situations
Do not attach the hose or tool to your body. Attach the
hose to the structure to reduce the risk of loss of balance
if the hose shifts.
.
.
.
.
.
.
.
.
. .
.
.
.
.
.
.
.
.
.
.
.
Table of Contents Safety Information
Read operator’s manual To reduce the risk of injury,
user must read and understand operator's manual
before using this product.
:
Eye protection Always wear safety goggles, safety
glasses with side shields or a full face shield when
operating this product
:
,
.
Risk to hearing Always wear ear protection when
using this tool Failure to do so may result in
hearing loss
:
.
.
Risk of serious personal injury Never place hands
or any other body parts in the fastener discharge
area of the nailer the tool might eject a fastener
and could result in death or serious personal injury
:
,
.
Keep the work area clean and well lighted Cluttered
benches and dark areas increase the risks of accidents
Do not operate the tool in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust
The tool creates a spark which may ignite flammable
liquids, gases or dust
Keep bystanders, children, and others away while
operating the tool Distractions could result in improper
use and cause injury
Avoid unintentional misfires
.
.
.
.
.
.
.
Always use caution to
avoid accidentally firing. Do not point towards yourself or
anyone whether it contains fasteners or not.
SYMBOLS
WORK AREA SAFETY
1.
2.
3.
4.
WARNING: Instructions pertaining to a risk of fire,
electric shock, or injury to persons.
1.
2.
3.
4.
5.
6.
7.
8.
9.
PERSONAL SAFETY
10.
11.
WARNING: To avoid serious personal injury, do not
attempt to use this product until you read the manual
thoroughly and understand it completely. Save this
manual and review frequently for continuing safe
operation and instructing others who may use this
tool.
WARNING: When using tools, basic precautions
should always be followed, including the followings.
3
2
HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Table of Contents-------------------------------------------------2
Safety Information------------------------------------------------3
Symbols--------------------------------------------------------------------3
Work area safety------------------------------- ---------------3
Personal safety------------------------------------------------------------3
Tool use and care----------------------------------------------------------4
Tool service----------------------------------------------------------------5
Air source------------------------------------------------------------------5
Operation------------------------------------------------------------------5
Air supply and connections-----------------------------------------------6
Loading tool---------------------------------------------------------------6
Warranty-----------------------------------------------------------7
Unpacking---------------------------------------------------------7
Specification------------------------------------------------------8
Features-----------------------------------------------------------8
Operation----------------------------------------------------------9
Adjusting the offset magazine-------------------------------------------9
Loading fasteners---------------------------------------------------------9
Unloading fasteners-----------------------------------------------------10
Clearing jams------------------------------------------------------------10
Firing Lock---------------------------------------------------------------11
Setting the air pressure -------------------------------------------------11
Depth adjustment-----------------------------------------------------------11
Using the shingle guide--------------------------------------------------12
Firing the tool (contact actuation mode)--------------------------------12
Maintenance-----------------------------------------------------13
Anti-dust cap------------------------------------------------------------13
Lubrication---------------------------------------------------------------13
Cleaning------------------------------------------------------------------13
Cold weather operation--------------------------------------------------13
Recommended Hookup----------------------------------------14
Troubleshooting-------------------------------------------------15
-------------