Use and Care Manual

8
9
Specifications
Features
HUSKYTOOLS.COM
Air inlet: 1/4 inch NPT
Magazine capacity:
Weight: 3.35 lbs
Maximum pressure: 110 psi
Pressure range: 60 psi – 110 psi
Fasteners range:
Please contact 1-888-HD-HUSKY for further assistance.
Operation
Adjusting the exhaust
1
Theadjustableexhaustonthecapofthetoolallows
userstodirecttheexhaustaccordingtooperator
preference.Toadjustthedirection,turntheexhaustcap
inthedesireddirection.
Loadingfasteners
2
Connect the tool to the air source.
Push down on the latch button(A). Pull back on the
magazine cover(B).
For brad nail: Insert a stick of fasteners into the magazine
rail(C). Make sure the pointed ends of the fasteners are
resting on the bottom ledge of the magazine when
loading.
For staples: set a stick of fasteners on the top of
magazine.
Make sure the fasteners are not dirty or damaged.
Push the magazine cover(B) forward until latch button
pops up.
Latchbutton(A)
Magazine
Cover(B)
MagazineRail(C)
5/8”
3/4”
1”
1-1/4”
1-3/8”
1-3/4”
2”
15mm
20mm
25mm
32mm
35mm
40mm
45mm
50mm
0.079”(2mm)
1-3/16” 30mm
1/4”(5.7mm)
1”
3/4”
5/8”
25mm
19mm
16mm
1-1/4”
32mm
1-1/2” 38mm
1-9/16”
40mm
1.26 x 1.05mm
(0.050” x 0.041”)
1.26 x 1.05mm
(0.050” x 0.041”)
18 Ga. Staples
18 Ga. Brad Nails
Compatible with generic 18 gauge brad nails and staples.
18 Ga. Brad nail: 100pcs
18 Ga. Staple: 100pcs
18 Ga. Brad nail: 5/8” - 2”
18 Ga. Staple: 5/8” - 1-9/16”
360°ADJUSTABLE EXHAUST
Allows user to direct air away from face.
ONE PIECE DRIVE BLADE
For increased durability.
COMFORT-GRIP HANDLE
For increased comfort and control.
DUAL-MODE TRIGGER
Easily allows for single or sequential firing.
ADJUSTABLE DEPTH
Depth is easily adjustable for various applications.
QUICK-JAM RELEASE
Allows for easy access clearing in the event of a jam.
NON-MARRING SAFETY CONTACT
Protect working surface from damage.
WARNING: Thetoolmayfirewhenitis first
connectedtotheairsource.Alwaysconnectthe
tooltotheairsourcebeforeloadingfastenersto
preventinjuryfromunintendedcycling.Alwaysmake
surethetool’smagazineisemptyatthebeginning
ofeachworksession,beforeconnectingtoanair
source.
1-9/16”