Owner's Manual

Husky Corporation • 2325 Husky Way • Pacic, MO 63069 • Phone: [phone] • Fax: [phone] • www.husky.com
Page 4 009351-2 6/2013
SPOUT REPLACEMENT INSTRUCTIONS
1. Remove spout lock nut and spout.
2. Remove and discard spout seal.
3. Place new spout seal in groove.
4. Insert new spout into body making sure the vent tube is in the
port.
5. While holding the spout in proper alignment, tighten the spout
lock nut rmly, approximately 35 - 60 lbf•ft / 47 - 81 N•m. Do
not overtighten.