Wrench 2A 10 03 01 2B 07 05 2C 08 04 06 09 Gun Trigger Gun Needle Air Valve Plastic Hopper Hopper Clip Quick-Connect Adapter Hopper Cover
Assembling The Air Hopper And Gun Attaching the spray nozzle Assemble the air hopper and gun by aligning the notched opening in the base of the hopper to the raised notch of the gun body. Push the hopper down over the hopper port as far as it will go and securely tighten the hopper clamp. Ensure O-ring of gun be fully covered by O-ring of hopper, so that connection is in place. Choose the properly sized nozzle (A, B or C) and install it to the hopper gun. Tighten the retaining ring securely.
Spraying 6 Adjusting Adjusting air compressor to adjust air pressure. If you want to stop air flow, close your air compressor. Adjust the needle properly to achieve a uniform, round spray pattern. It may be necessary to change spray nozzles to achieve the desired spray pattern. Start with air valve and gun needle completely open. If needed, slowly close the gun air flow by screwing the needle inward until you get a good spray pattern.
5. Misleading sound from hopper 5. When spraying finished, there is sound similar to "air leakage" from the hopper. Turn off the air compressor, the sound will disappear.
