Instructions / Assembly

OPERATOR’S MANUAL
6 FT WORKBENCH
MODEL # 72WB01SS-THD
• Weight of the unit is 94 lbs.
• The maximum load capacity for the work surface is 1000 lbs.
evenly distributed.
• The maximum product weight, including contents stored on the
work surface is 1094 lbs.
Locating Model # Information
Model numbers and other information required for service parts is
located on a white label on the upper right hand corner of the unit.
• Periodically the surfaces should be cleaned with a mild
detergent and water.
• Grease and oil can be removed with most standard cleaning
uids. For safety, use a nonammable cleaning uid.
• Auto wax will preserve the unit’s luster nish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
DANGER is used to indicate a hazardous
situation which, if not avoided, will result in serious injury
or death.
WARNING indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation
which, if not avoided, may result in minor injury, moderate
injury, or property damage.
CAUTION: Read and follow all Safety Rules and
Operating Instructions before rst use of this product.
DANGER
• DO NOT stand on this product. You may fall which may
cause personal injury.
• DO NOT mount this product on a truck bed or any
other moving object. This may cause personal injury or
product Damage.
• APPROPRIATELY SECURE this product before
moving it with a forklift.
WARNING
• USE APPROPRIATE SAFETY equipment when
using power and hand tools. Failure to do so may cause
personal injury or product damage.
• USE ADEQUATE MANPOWER when assembling
and moving this unit. Failure to do so may cause personal
injury or product damage.
• DO NOT alter this product in any manner. This may
cause product damage or personal injury.
• UNIT MUST BE located on a level surface. The
product may become unstable and tip if stored or moved
on an un-level surface, which may cause personal injury
or product damage.
• Stainless steel can discolor when exposed to pool chemi-
cals, saltwater or cleaners with bleach.
• Keep your stainless looking new by cleaning with a good
quality all-in-one stainless steel cleaner polish monthly.
Frequent cleaning will remove surface contamination that
could lead to rust.
• Do not clean with steel wool or other abrasive pads.
• Do not use cleaners not specically intended for
stainless steel on stainless surfaces (this includes
glass, tile and counter cleaners).
PAINTED SURFACES:
STAINLESS SURFACES:
CALL 1-866-440-3170 FOR SERVICE PARTS. Please
provide the Model Number when calling. To expand your garage
storage project, please visit www.homedepot.com/garagestorage
for additional product options.
F1831
SERVICE PARTS
SAFETY
CAPACITIES
MAINTENANCE
NOTE: IT IS RECOMMENDED
THAT UNIT IS ASSEMBLED WITH
AT LEAST TWO PERSONS.