Installation Guide

Assembly
4
Attaching Wedges to Tray Placing Handles on Wedges
Attaching the Legs Attaching the Leg Brace
Push bolts (AA & BB) through bottom of tray (A)
and through wedge (E).
Repeat for second wedge.
1 2
Make sure the holes in leg (C) are facing the
back of the tray.
Place leg over bolts (AA & BB) and loosely attach
to handle with nuts.
Repeat for other leg.
3
Place leg brace (D) across the back of leg (C)
and loosely attach using bolts and nuts (DD).
Repeat to attach the other end of the leg brace
to the other leg.
4
□
□
□
□
□
□
□
Turn tray (A) over, so the tray is at an angle of 45 degrees
to the ground.
Place handles (B) over bolts and lower onto wedges (E).
□
□
A
E
A A
B B
A
B
E
A A
C
B B
C
D
D D