Instructions / Assembly

7 HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Installation (continued)

Continue Installation

□ Insert the next panel (A) into the vertical J-trim (B) at one side.

□ Curve the panel slightly to the vertical J-trim (B) at the other side. The second panel (A) should interlock over the rst panel’s

screw channel, but leaving the hook channel accessible. Properly interlocked panels will conceal all screws.

□ Press down on the top of the second panel (A) to ensure that it is properly interlocked with the one below.

□ Check to ensure the panel (A) is level along the entire width of the panel. Repeat this process after installing every third panel (A)

□ Fasten the panel (A) to all wall studs using screws (BB).

□ Repeat this process for panels 3-10.

NOTE: Screws installed at the top of the vertical J-trims may

have to be removed to complete clean installation of top panels.

x 63

x 9

Properly overlapped

Complete Installation

□ Install your horizontal top L-trim (C) by simply clipping it into the lip above the screw cavity.

NOTE: Vertical J-Trims not included in image to show clear installation

of horizontal to L-trim.

x 1

A BB