Instructions / Assembly

3 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation
PLANNING INSTALLATION
Decide where and how high you would like your track wall section installed.
You must start and nish on studs.
Studs should be centered 16 in. apart in order to support 75 lbs per square foot.
NOTE: In order to support 75lbs per square
foot, your studs must be a maximum of 16in.apart.
TOOLS REQUIRED
Stud nder Level Pencil
Drill
Mitre saw
If you plan on
cutting your panels
Snips
For cutting trims
to length.
HARDWARE INCLUDED
Part Description Quantity
AA
Square-head bit # 2
1
BB 2 in screws
(Dual Robertson & Phillips Pan head #8)
88
NOTE: It is strongly recommended to use a drill
with the included square-head bit for all driving.
AA
BB