Instructions / Assembly
5 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (for one Wall Storage Rack)
1
Assemble the base
□ Attach the wall mount top bracket (H1) and
base assembly bottom bracket (G1) to the
vertical base assembly brackets (D1) using
large bolts (BB), large nuts (FF), large washers
(KK), and large lock washers (LL).
Hand-tighten only as you will be removing
these parts later to add additional items.
2
Fix the base to the wall
□ Find your studs and predrill one top hole (use
5
/
32
in. drill bit).
□ Use lag bolts (AA) to mount the assembled base unit from step 1 to wall studs.
□ Level, predrill and install the other side. Continue with four other bolts (AA), mounting to studs (as indicated by arrows below).
H1
D1
G1
D1
x 6
AA
x 4
x 4
BB
FF
NOTE: Use these holes
to install to your studs if
they are not located exactly
48in. apart.
up
down
x 4
x 4
KK
LL
Left side Right side