Instructions / Assembly

10
H1
G1
Assembly (for two Wall Storage Racks)
2
Connect H1, D1 and G1 on the  oor.
□ Connect the wall wount base assembly (H1) to the vertical base assembly bracket (D1) using bolts (BB),
nuts (FF), and washers (KK and LL).
□ Connect the base assembly bottom bracket (G1) to the vertical base assembly bracket (D1) using bolts (BB),
nuts (FF), and washers (KK and LL).
3
Replace bolt
□ Replace the indicated bolt with a long bolt (II) without using the nut.
x 1
II
NOTE: Hand tighten all
bolts until rack is complete.
Figure 1
H1
G1
D1
FF
LL KK BB
Interior Exterior
x 3