Instructions / Assembly

DOOR CONSTRUCTION

Items Needed:

GG - #10-24 Hex Nut (Qty: 8)

FF - 3/16in Washer (Qty: 8)

NN - Left Hinge (Qty: 2)

PP - Right Hinge (Qty: 2)

EE - #10-24 Carriage Bolt (Qty: 8)

E - Door Left (Qty: 1)

F - Door Right (Qty: 1)

Process:

• Attach the NN and PP Hinges to the Doors using (8)

EE, (8) FF, and (8) GG. Wrench tighten.

Note: The hinges for both doors MUST be mounted so the

Hinge Pin points UP at the TOP of the door and DOWN at

the BOTTOM of the door.

• Make sure to insert hinges through slots.

Figure 8

Left side door shown

Top

Figure 8.1

Bottom

Figure 9

Process:

• Slide the left door hinge pin PP into the lower hinge plate

RR.

• Slide the hinge Plate RR onto the upper door hinge pin

NN. (Figure 9.1)

• Attach the left door E by mounting the upper hinge RR,

using (2) AA, (2) CC and (2) DD.

• Attach the right door F in the same manner.

• Adjust Doors for optimum performance before tightening

screws.

DOOR HINGE ATTACHMENT

Items Needed:

AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4)

CC - 5/16-in Washer (Qty: 4)

DD - 1/4-20 Serrated Flange Nut (Qty: 4)

RR - Hinge Plate (Qty: 2)

Figure 9.1