Instructions / Assembly

OPERATION

Release

• Empty the drawer.

• Fully extend the drawer.

REMOVING DRAWERS

Process:

• Place magnet JJ on door C in the locations noted.

• Make sure the adhesive backing is facing towards the

cabinet.

• Close the door to double check the Magnets are in the

correct positions.

• Open the door and remove the protective covering over

the adhesive on the back of the magnet.

• Close the door and press rmly on the front of the door to

seat magnets.

• The magnets will now be attached to the cabinet shell in

the correct location.

Items Needed:

JJ - Magnet (Qty: 2)

MAGNET INSTALLATION

1.50-in

(3.81cm)

1.50-in

(3.81cm)

1.00-in

(2.54cm)

1.00-in

(2.54cm)

Figure 7

REMOVING PROTECTIVE FILM FROM STAINLESS

STEEL

• Starting at one of the corners, peel back the protective

coating from the stainless top.

• Be sure to remove all the protective coating before

initial use.

• Follow the cleaning methods in the maintenance

section to keep the stainless looking new.