Use and Care Manual

6
1
Adjusting the regulator
NOTE: Ensure the regulator adjusting knob is unlocked
when adjusting pressure. The regulator will be damaged if
the knob is turned in the locked position.
□ Unlock the regulator adjustment knob (C)
by pulling the knob out and away from the
compressor.
□ Turn the regulator adjustment knob (C)
counterclockwise until it stops (closed position).
□ Check that all connections are tight. A small leak
will substantially reduce the performance of your
compressor.
NOTICE: If you suspect a leak, spray a small amount
of soapy water around the area with a spray bottle. If
bubbles appear, retighten or reseal the connection. Do not
overtighten.
□ Turn the regulator adjustment knob (C) clockwise
until the desired outlet pressure is reached (as
indicated on the gauge (B)) .
□ When the desired pressure is reached, push
the regulator adjustment knob (C) toward the
regulator (A) to lock the setting.
Operation