Use and Care Manual

2
Safety Information
Table of Contents
Safety Information ....................................2
Work Area Safety ...................................2
Personal Safety .....................................2
Warranty ...................................................3
Pre-Installation .........................................4
Specifications ........................................4
Package Contents ..................................4
Planning Installation ..............................4
Installation ................................................5
Connecting to the Air Compressor .........5
Operation...................................................6
Adjusting the Regulator .........................6
This manual contains information that is important for
you to know and understand. This information relates
to protecting your safety and preventing equipment
problems. To help you recognize this information, we use
the symbols at the right. Please read the manual and pay
attention to these symbols.
WORK AREA SAFETY
□ Keep your work area clean and well lit. Ensure
floors are not slippery from wax or dust.
WARNING: Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes. Keep bystanders, children,
pets, and visitors away while operating tools. Distractions
can cause you to lose control.
PERSONAL SAFETY
□ Keep proper footing and balance at all times.
Proper footing and balance enables better control
of the tool in unexpected situations.
WARNING: Operating any power tool can result in foreign
objects being thrown into your eyes, which can result in
severe eye damage. Before beginning operation, always
wear safety goggles, safety glasses with side shields, or
a full face shield when needed. Always use eye protection
marked to comply with ANSI Z87.1.
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
WARNING: Use safety equipment. Always wear eye
protection with side shields when operating power tools.
A dusk mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
CAUTION: Always disconnect the air supply and power
supply before making adjustments, servicing a tool, or
when a tool is not in use.
WARNING: Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long hair can
be caught in moving parts.
WARNING: Never touch any exposed metal parts on
compressor during or immediately after operation. The
compressor will remain hot for several minutes after
operation. Do not reach around protective shrouds or
attempt maintenance until the unit has been allowed to
cool.