User Manual

9964 Installation Instruction Front_Back

03/05/2012

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater™ Floor Liner from Winfield Consumer Products. Your new front floor liners

are custom molded to fit your Nissan Altima. The liners are made to take the place of your factory floor mats. For correct

fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the

factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest way to

clean your liners is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work well. Use of Armor All

Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR NISSAN ALTIMA

FRONT HUSKY LINERS

WeatherBeater™ FLOOR LINERS

TO EASE INSTALLATION OF YOUR ALTIMA FRONT LINERS, MOVE THE FRONT SEATS TO THEIR MOST

REARWARD POSITION. WITH THIS DONE, YOU CAN EASILY INSTALL THE LINERS. ONCE LINERS ARE IN

PLACE, REPOSITION THE FRONT SEATS AS DESIRED.

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE

PAGE 1
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater™ Floor Liner from Winfield Consumer Products. Your new front floor liners are custom molded to fit your Nissan Altima. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting.
PAGE 2
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater™ Floor Liner from Winfield Consumer Products. Your new rear floor liner is custom molded to fit your Nissan Altima 4-Door Sedan. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting.