User Manual

9955 Installation Instruction Front_Back
07/23/2012
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear
floor liner is custom molded to fit your Lexus RX350. The liner is made to take the place of your factory floor
mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners.
However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR RX350 & RX450h
REAR SEAT WeatherBeater® FLOOR LINERS
TO EASE INSTALLATION OF YOUR RX350/RX450h SECOND SEAT LINER, MOVE THE FRONT
SEATS TO THEIR MOST FORWARD POSITION. WITH THIS DONE, INSTALL LINER IN VEHICLE.
ONCE LINER IS IN PLACE, REPOSITION THE FRONT SEATS AS NEEDED.
NOTE TO RX450h ONWERS: YOUR LINER HAS 3 RECESSED AREAS LOCATED ALONG THE BACK
WALL THAT MATCH UP TO THE GRILLE VENTS ON YOUR RX450h. THESE RECESSED AREAS
CAN BE TRIMMED AWAY TO ALLOW THE LINER TO CONTOUR AROUND THE GRILLES. TO
TRIM, SIMPLY REMOVE THE RECESSED AREAS USING A UTILITY KNIFE OR HEAVY SHEARS.
FRONT OF VEHICLE