User Manual
9955 Installation Instruction Front_Back
07/23/2012
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Lexus RX350. The liners are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR LEXUS RX350 & RX450h
FRONT WeatherBeater® FLOOR LINERS
TO EASE INSTALLATION OF YOUR RX350/RX450h FRONT FLOOR LINERS, MOVE THE FRONT
SEATS TO THEIR REAR MOST POSITION. WITH THIS DONE, THE FACTORY CARPET HOOK(S)
LOCATED IN THE CARPET OF THE DRIVER’S SIDE FLOOR CAN BE EASILY REMOVED.
REMOVING THE HOOK(S) WILL ALLOW YOUR LINER TO LAY COMPLETELY FLAT. TO REMOVE
THE HOOK(S), APPLY FIRM AND EVEN PRESSURE WHILE LIFTING THE END OF THE HOOK ARM
STRAIGHT UP. ONCE THE HOOK(S) ARE REMOVED, INSTALL THE LINERS AND REPOSITION
SEATS AS DESIRED.
LEFT OR DRIVER’S SIDE
RIGHT OR PASSENGER’S SIDE


