User Guide
9917 Installation Instruction Front_Back
08/02/2016
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Dodge Challenger. The liners are made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new
floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR
DODGE CHALLENGER WeatherBeater FLOOR LINERS
TO EASE INSTALLATION OF YOUR CHALLENGER FRONT FLOOR LINERS, MOVE THE FRONT SEATS TO
THEIR REAR MOST POSITION. ONCE YOU HAVE INSTALLED THE LINERS, REPOSITION YOUR FRONT
SEATS AS NEEDED.
LEFT OR DRIVER’S SIDE
RIGHT OR PASSENGER’S SIDE


