Specification Sheet

9899 Installation Instruction Front_Back

06_21_2016

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front

floor liners are custom molded to fit your Toyota Prius. The liners are made to take the place of your factory

floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor

liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work

well. Use of Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA PRIUS

FRONT WeatherBeater® FLOOR LINERS

TO EASE INSTALLATION OF YOUR TOYOTA PRIUS FRONT FLOOR LINERS, MOVE THE FRONT

SEATS TO THEIR REAR MOST POSITION. NEXT, REMOVE ANY EXISTING FLOOR MATS FROM

THE VEHICLE. FINALLY, INSTALL YOUR HUSKY LINERS POSITIONING THEM AS SHOWN

ABOVE. TAKE CARE TO MAKE SURE THE LINERS ARE ATTACHED TO THE TWIST-LOCK

FASTENERS ON THE DRIVER’S SIDE

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE

PAGE 1
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front floor liners are custom molded to fit your Toyota Prius. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting. Your liners are made from an engineering resin that is lightweight and extremely tough and durable.
PAGE 2
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear floor liner is custom molded to fit your Toyota Prius. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting. Your liner is made from an engineering resin that is lightweight and extremely tough and durable.